Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY LOCK AND UNLOCK SWITCH › 2013.08–2017.10
RM30M0E _58 Vehicle Interior _017111 THEFT DETERRENT / KEYLESS ENTRY _0087439 ENTRY LOCK AND UNLOCK SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENTRY LOCK AND UNLOCK SWITCH  INSPECTION  


PROCEDURE

Hide 69220 1.INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH

a.
B343675
2.083,2.542 2.5,2.542 true 2.083,2.385 2.479,2.198 true 2.677,0.76 2.948,0.646 false 1.385,1.719 1.698,1.917 0.313,0.198 10 false *a 2.333,0.573 2.646,0.771 0.313,0.198 10 false *b 2.344,0.156 2.656,0.354 0.313,0.198 10 false *c 2.531,2.125 3.146,2.323 0.615,0.198 10 false TRG- 2.542,2.469 3.156,2.667 0.615,0.198 10 false TRG+ 3,0.542 3.313,0.74 0.313,0.198 10 false *d
*a Component without harness connected
(Front Door Outside Handle Assembly LH)
*b Pushed
*c Not Pushed
*d Trigger Switch


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (TRG-) - 3 (TRG+) Pushed Below 1 Ω
1 (TRG-) - 3 (TRG+) Not pushed 10 kΩ or higher


If the result is not as specified, replace the front door outside handle assembly LH.