Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH › 2013.08–2017.10
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0087446 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84820 1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD)

a.
B347065C02
0.458,3.198 0.677,2.656 true 1.438,3.208 1.667,2.677 true 1.604,3.219 1.844,2.677 true 0.99,0.875 1.396,0.875 true 1.615,0.698 1.979,0.698 true 0.135,2.302 0.448,2.5 0.313,0.198 10 false *a 0.74,2.5 1.052,2.698 0.313,0.198 10 false UL 1.677,2.479 1.99,2.677 0.313,0.198 10 false L 1.917,2.51 2.229,2.708 0.313,0.198 10 false E 2.042,0.625 2.354,0.823 0.313,0.198 10 false *b 0.781,0.802 1.094,1 0.313,0.198 10 false *c
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)
*b Lock Switch
*c Unlock Switch


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (L) - 1 (E) Lock switch pushed Below 1 Ω
2 (L) - 1 (E) off 10 kΩ or higher
9 (UL) - 1 (E) Unlock switch pushed Below 1 Ω
9 (UL) - 1 (E) off 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.



Hide 84820 2.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD)

a.
B295736C11
0.479,3.219 0.635,2.677 true 0.625,3.229 0.844,2.656 true 1.448,3.208 1.667,2.667 true 0.979,0.896 1.406,0.885 true 1.615,0.698 1.969,0.698 false 0.156,2.302 0.51,2.594 0.354,0.292 10 false *a 0.865,2.5 1.198,2.719 0.333,0.219 10 false UL 0.604,2.479 0.896,2.75 0.292,0.271 10 false E 1.719,2.479 1.938,2.719 0.219,0.24 10 false L 2.021,0.625 2.333,0.823 0.313,0.198 10 false *b 0.781,0.823 1.094,1.021 0.313,0.198 10 false *c
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)
*b Lock Switch
*c Unlock Switch


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (L) - 9 (E) Lock switch pushed Below 1 Ω
2 (L) - 9 (E) off 10 kΩ or higher
8 (UL) - 9 (E) Unlock switch pushed Below 1 Ω
8 (UL) - 9 (E) off 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.