Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0087447 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

B203483
2.115,0.906 2.552,1.219 0.438,0.313 10 false *a 0.229,0.188 0.667,0.5 0.438,0.313 10 false *b 0.25,0.833 0.688,1.146 0.438,0.313 10 false *c
*a Component without harness connected
(Unlock Warning Switch Assembly)
*b Not Pushed
*c Pushed


a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed Below 1 Ω
1 - 2 Not Pushed 10 kΩ or higher


If the result is not as specified, replace the unlock warning switch assembly.