Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK(for TMT Made) › 2013.08–2018.01
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0087448 FRONT DOOR LOCK(for TMT Made) G

DOOR LOCK  FRONT DOOR LOCK(for TMT Made)  INSPECTION  


PROCEDURE

Hide 69320 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH

a.
B343698C01
0.917,3.865 1.333,3.865 true 2.24,3.865 2.656,3.865 true 0.958,3.073 1.271,3.229 0.313,0.156 10 false *a 2.375,2.552 2.688,2.708 0.313,0.156 10 false *b 1.729,2.865 2.042,3.021 0.313,0.156 10 false *c 0.781,3.771 1.094,3.927 0.313,0.156 10 false L 2.698,3.771 3.01,3.927 0.313,0.156 10 false UL
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock


Check the operation.

i.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)
Locked
Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)
Unlocked


If the result is not as specified, replace the front door lock assembly LH.



b.
B343698C03
1.479,4.438 1.677,4.156 true 2.083,4.438 1.896,4.156 true 1,3.104 1.313,3.26 0.313,0.156 10 false *a 2.385,2.51 2.698,2.667 0.313,0.156 10 false *b 1.688,2.802 2,2.958 0.313,0.156 10 false *c 1.292,4.469 1.865,4.625 0.573,0.156 10 false LSSR 2.063,4.469 2.635,4.625 0.573,0.156 10 false E
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock


Check the resistance of the unlock detection switch.

(w/ Unlock Detection Switch)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
7 (E) - 8 (LSSR) Locked 10 kΩ or higher
7 (E) - 8 (LSSR) Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



c.
B347074C01
1.292,4.438 1.427,4.188 true 1.521,4.438 1.563,4.198 true 1.875,4.448 1.813,4.188 true 0.969,3.188 1.281,3.385 0.313,0.198 10 false *a 2,0.833 2.313,1.031 0.313,0.198 10 false *b 2.667,0.74 2.979,0.938 0.313,0.198 10 false *c 3.198,1.042 3.406,1.24 0.208,0.198 10 false *d 1.198,4.458 1.49,4.667 0.292,0.208 10 false UL 1.479,4.458 1.625,4.635 0.146,0.177 10 false L 1.844,4.458 2.01,4.635 0.167,0.177 10 false E
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Lock
*c OFF
*d Unlock


Check the resistance of the lock and unlock switch.

(w/ Lock and Unlock Switch)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
9 (L) - 7 (E) Locked Below 1 Ω
9 (L) - 7 (E) off 10 kΩ or higher
10 (UL) - 7 (E) Unlocked Below 1 Ω
10 (UL) - 7 (E) off 10 kΩ or higher


If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 2.INSPECT FRONT DOOR LOCK ASSEMBLY RH

a.
B343699C01
0.906,3.865 1.323,3.865 true 2.25,3.865 2.667,3.865 true 1.021,3.094 1.333,3.25 0.313,0.156 10 false *a 0.958,2.521 1.271,2.677 0.313,0.156 10 false *b 1.625,2.865 1.938,3.021 0.313,0.156 10 false *c 0.771,3.76 1.083,3.917 0.313,0.156 10 false L 2.74,3.771 3.052,3.927 0.313,0.156 10 false UL
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock


Check the operation.

i.

Apply battery voltage and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)
Locked
Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)
Unlocked


If the result is not as specified, replace the front door lock assembly RH.



b.
B343699C03
1.521,4.448 1.677,4.156 true 1.875,4.146 2.01,4.438 true 1.021,3.083 1.333,3.24 0.313,0.156 10 false *a 0.958,2.521 1.271,2.677 0.313,0.156 10 false *b 1.625,2.865 1.938,3.021 0.313,0.156 10 false *c 1.469,4.448 1.781,4.604 0.313,0.156 10 false E 1.875,4.448 2.344,4.625 0.469,0.177 10 false LSSR
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock


Check the resistance of the unlock detection switch.

(w/ Unlock Detection Switch)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
7 (LSSR) - 8 (E) Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



c.
B343700C02
2.125,4.146 2.542,4.146 true 1.521,4.479 1.667,4.177 true 2.094,4.479 1.948,4.188 true 1.104,3.26 1.417,3.417 0.313,0.156 10 false *a 1.24,0.854 1.552,1.01 0.313,0.156 10 false *b 0.583,0.75 0.896,0.906 0.313,0.156 10 false *c 0.094,1.042 0.406,1.198 0.313,0.156 10 false *d 2.594,4.073 2.906,4.229 0.313,0.156 10 false UL 1.458,4.479 1.771,4.635 0.313,0.156 10 false E 2.094,4.49 2.406,4.646 0.313,0.156 10 false L
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Lock
*c OFF
*d Unlock


Check the resistance of the lock and unlock switch.

(w/ Lock and Unlock Switch)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Locked Below 1 Ω
6 (L) - 8 (E) off 10 kΩ or higher
5 (UL) - 8 (E) Unlocked Below 1 Ω
5 (UL) - 8 (E) off 10 kΩ or higher


If the result is not as specified, replace the front door lock assembly RH.