Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE DOOR HINGE TORSION BAR
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0087459 LUGGAGE DOOR HINGE TORSION BAR A

DOOR / HATCH  LUGGAGE DOOR HINGE TORSION BAR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


PROCEDURE

Hide 64127B 1.INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

a.
B343659

Engage the guide, rotate the luggage compartment door torsion bar support in the direction shown by the arrow in the illustration and install the luggage compartment door torsion bar support.


Hide 64532 2.INSTALL LUGGAGE DOOR HINGE TORSION BAR LH

a.

Connect the right end of the luggage door hinge torsion bar LH to the body.


b.

Engage the guide and install the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.


c.
B343652
0.781,1 0.927,0.719 true 2.24,1.052 2.521,0.969 false 1.885,2.729 1.938,2.896 false 0.698,1.042 1.01,1.24 0.313,0.198 10 false *1 2.063,1.063 2.375,1.26 0.313,0.198 10 false *1 1.823,2.927 2.135,3.125 0.313,0.198 10 true SST
*1 Luggage Door Hinge Torsion Bar LH


Using SST, while pressing down SST in the direction shown by the arrow in the illustration to relieve the spring tension, connect the left end of the luggage door hinge torsion bar LH to install it on the body.

SST
09804-24010  


Hide 64531 3.INSTALL LUGGAGE DOOR HINGE TORSION BAR RH

a.

Connect the left end of the luggage door hinge torsion bar RH to the body.


b.

Engage the guide and install the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.


c.
B343650
1.458,2.802 1.302,2.969 false 2.51,1.01 2.417,0.729 true 0.802,1.021 1.104,1.094 false 1.177,1.052 1.49,1.25 0.313,0.198 10 false *1 2.469,1.052 2.781,1.25 0.313,0.198 10 false *1 1.135,3 1.448,3.198 0.313,0.198 10 true SST
*1 Luggage Door Hinge Torsion Bar RH


Using SST, while pressing down SST in the direction shown by the arrow in the illustration to relieve the spring tension, connect the right end of the luggage door hinge torsion bar RH to install it on the body.

SST
09804-24010