After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.
64531
1.REMOVE LUGGAGE DOOR HINGE TORSION BAR RH
| *1 | Luggage Door Hinge Torsion Bar RH |
Using SST, while pressing down SST in the direction shown by the arrow in the illustration to relieve the spring tension, disconnect the right end of the luggage door hinge torsion bar RH from the luggage compartment door hinge link.
Disengage the guide and separate the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support.
Disconnect the left end of the luggage door hinge torsion bar RH from the body and remove it.
64532
2.REMOVE LUGGAGE DOOR HINGE TORSION BAR LH
| *1 | Luggage Door Hinge Torsion Bar LH |
Using SST, while pressing down SST in the direction shown by the arrow in the illustration to relieve the spring tension, disconnect the left end of the luggage door hinge torsion bar LH from the luggage compartment door hinge link.
Disengage the guide and separate the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support.
Disconnect the right end of the luggage door hinge torsion bar LH from the body and remove it.
64127B
3.REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT
Rotate the luggage component door torsion bar support in the direction shown by the arrow in the illustration, disengage the guide and remove the luggage compartment door torsion bar support.