Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2013.08–2017.10
RM30M0E _58 Vehicle Interior _017120 INTERIOR PANELS / TRIM _0089077 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  INSTALLATION  


PROCEDURE

Hide 55301 1.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

a.

Using a nipper, cut off both ends of the 3 runner portions shown in the illustration (When installing a new one).

B346877C01
0.76,1.177 0.479,0.833 0.479,0.833 0.771,0.542 false 6.375,1.177 6.688,0.823 6.688,0.823 6.375,0.542 false 6.146,0.813 6.313,0.813 false 0.833,0.833 1,0.833 false 1.74,4.271 2.167,4.5 2.167,4.5 2.646,4.344 false 2.01,3.938 2.198,3.781 false 2.063,4.594 2.375,4.792 0.313,0.198 10 false *b 6.708,0.74 7.021,0.938 0.313,0.198 10 false *b 0.656,0.74 0.969,0.938 0.313,0.198 10 false *a 6.354,0.729 6.667,0.927 0.313,0.198 10 false *a 2.219,3.646 2.531,3.844 0.313,0.198 10 false *a 0.323,0.729 0.635,0.927 0.313,0.198 10 false *b
*a Runner Portion *b Cut Off



b.

Engage the 9 guides and temporarily install the instrument panel sub-assembly.

NOTICE:
·

Do not damage the instrument panel sub-assembly.

·

Do not allow the wire harnesses to interfere with the surrounding parts.




c.

Install the 2 clips.

B346861E01
2.104,1.375 2.448,1.552 0.344,0.177 10 true <A> 5.188,1.792 5.531,1.969 0.344,0.177 10 true <A> 6.083,1.844 6.427,2.021 0.344,0.177 10 true <A> 4.281,4.156 4.625,4.333 0.344,0.177 10 false <B> 0.083,4.031 0.427,4.208 0.344,0.177 10 false <E> 2.927,4.146 3.271,4.323 0.344,0.177 10 false <A> 4.729,3.781 5.073,3.958 0.344,0.177 10 false <D> 5.469,3.917 5.813,4.094 0.344,0.177 10 false <B> 6.813,4 7.156,4.177 0.344,0.177 10 false <E>


d.

Install the 4 bolts <A>, 2 bolts <E>, bolt <D> and 2 screws <B>.

Torque:
Bolt <D> : 20 N*m (204 kgf*cm, 15 ft.*lbf)


e.

for Automatic Air Conditioning System:

i.

Connect the cooler thermistor hose.



f.

Engage the clamps.


g.

Connect the connectors.


Hide 53601 2.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Engage the claw and the 3 guides and connect the hood lock control lever sub-assembly.


Hide 82142A 3.CONNECT INSTRUMENT PANEL WIRE (w/ Airbag System)

a.
B346878

Connect the connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



Hide 55660 5.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Engage the 7 claws and the clip and install the No. 2 instrument panel register assembly.


Hide 55475A 6.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

a.

Engage the 6 claws and the 4 clips and install the No. 2 instrument cluster finish panel garnish.


Hide 55604B 7.INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY (for Front Passenger Side)

a.
B346879

Engage the 2 claws and install the instrument panel cup holder sub-assembly.


b.

Close the instrument panel cup holder sub-assembly.


Hide 55900 8.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 55900A 9.INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)

Hide 55902C 10.INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55607 11.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Engage the guide and the 3 claws and install the No. 2 instrument panel under cover sub-assembly.


Hide 55550 12.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

a.
B346880

With the glove compartment door assembly opened approximately 47° from its closed position, engage the 2 hinges horizontally.

NOTICE:
·

Engaging the hinges from the top will deform the hinges.

·

Be sure to install the glove compartment door assembly horizontally.




b.
B346853

While pushing in the sides of the glove compartment door assembly as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.


Hide 83100 13.INSTALL COMBINATION METER ASSEMBLY

Hide 55410C 14.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Engage the 4 clips and the 2 claws and install the instrument cluster finish panel assembly.


Hide 55604A 15.INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY (for Driver Side)

a.
B346851

Engage the 2 claws and install the instrument panel cup holder sub-assembly.


Hide 55650 16.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)

a.

Engage the 3 claws and the 2 clips and install the No. 1 instrument panel register assembly.


Hide 55650 17.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD)

a.

Engage the 2 claws and the 3 clips and install the No. 1 instrument panel register assembly.


Hide 55474C 18.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

a.
B346881

Engage the 2 claws and the 2 clips and install the No. 1 instrument cluster finish panel garnish.


b.

Close the instrument panel cup holder sub-assembly.


Hide 84140 19.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

Hide 20.INSTALL UPPER CENTER INSTRUMENT CLUSTER FINISH PANEL

a.

Engage the 3 claws and the clip and install the upper center instrument cluster finish panel.


Hide 55411G 21.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

a.
B346882C01
0,0 3.427,0 false
V100155

Protective Tape


Engage the 12 clips and the 2 claws and the 4 guides and install the No. 1 instrument cluster finish panel as shown in the illustration.


b.

Remove the protective tape.


Hide 55432B 22.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)

a.

Connect the connectors.


b.

Engage the 5 clips and the 2 claws and install the lower instrument panel finish panel.


Hide 55432B 23.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

a.

Connect the connectors.


b.

Engage the 6 clips and the claw and install the lower instrument panel finish panel.


Hide 55606 24.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Engage the claw and the guide and install the No. 1 instrument panel under cover sub-assembly.


b.

Install the 3 screws <C>.


Hide 25.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

Hide 26.INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)

a.

Engage the 2 guides and install the radio tuner opening cover with bracket.


b.

Install the 4 screws.


Hide 55412D 27.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (w/ Radio Receiver)

a.

Connect the connector.


b.

Engage the 7 clips and the 6 claws and install the center instrument cluster finish panel.


Hide 55412D 28.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)

a.

Connect the connector.


b.

Engage the 7 clips and install the center instrument cluster finish panel.


Hide 62212 29.INSTALL FRONT PILLAR GARNISH LH

Hide 62211 30.INSTALL FRONT PILLAR GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62312B 31.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door opening trim weatherstrip LH.


Hide 62311B 32.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 62112 33.INSTALL COWL SIDE TRIM BOARD LH

Hide 62111C 34.INSTALL COWL SIDE TRIM BOARD RH

HINT:

Use the same procedure as for the LH side.


Hide 35.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)