88625Q
1.REMOVE COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR (for Automatic Air Conditioning System)
88625H
2.REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)
55434B
3.REMOVE NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for LHD)
Disengage the 2 claws and the 2 clips and remove the No. 2 lower center instrument panel finish panel.
55434B
4.REMOVE NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)
Disengage the 4 claws and the clip and remove the No. 2 lower center instrument panel finish panel.
55434F
5.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Disengage the 5 claws and remove the lower center instrument panel finish panel.
55627A
6.REMOVE INSTRUMENT PANEL CUP HOLDER RAIL (for Driver Side)
Remove the 3 screws <C>.
Disengage the 2 guides and remove the instrument panel cup holder rail.
55627A
7.REMOVE INSTRUMENT PANEL CUP HOLDER RAIL (for Front Passenger Side)
Remove the 3 screws <C>.
Disengage the 2 guides and remove the instrument panel cup holder rail.
55318C
8.REMOVE INSTRUMENT SIDE PANEL LH
Disengage the 5 claws and the 3 guides and remove the instrument side panel LH.
55317A
9.REMOVE INSTRUMENT SIDE PANEL RH
Use the same procedure as for the LH side.
55950G
10.REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 3 screws <C>.
Disengage the 3 guides and remove the defroster nozzle assembly.
55085
11.REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Remove the 3 screws <C>.
Disengage the 3 guides and remove the No. 2 heater to register duct sub-assembly.
73970A
12.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (w/ Airbag System)
55431B
13.REMOVE UPPER INSTRUMENT PANEL FINISH PANEL (w/o Airbag System)
Disengage the 12 claws and remove the upper instrument panel finish panel.
55041A
14.REMOVE AIRBAG PASSENGER MOUNTING BRACKET SUB-ASSEMBLY (w/o Airbag System)
Remove the 2 nuts <F> and the airbag passenger mounting bracket sub-assembly.
55084E
15.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Remove the 3 screws <C>.
Disengage the 3 guides and remove the No. 1 heater to register duct sub-assembly.
86101
16.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)
86101
17.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)
55845A
18.REMOVE NO. 3 HEATER TO REGISTER DUCT
Remove the 2 screws <C>.
Disengage the 2 guides and remove the No. 3 heater to register duct.
82142
19.REMOVE NO. 2 INSTRUMENT PANEL WIRE (for Automatic Air Conditioning System)
Disengage the 3 clamps and remove the No. 2 instrument panel wire.
55355
20.REMOVE NO. 1 INSTRUMENT PANEL CUSHION
Remove the No. 1 instrument panel cushion.
55356C
21.REMOVE NO. 2 INSTRUMENT PANEL CUSHION
Remove the No. 2 instrument panel cushion.
55349C
22.REMOVE INSTRUMENT PANEL CUSHION
Remove the instrument panel cushion.