1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
16361A
2.REMOVE FAN AND GENERATOR V BELT (for 1NZ-FE)
16361A
3.REMOVE FAN AND GENERATOR V BELT (for 2NZ-FE)
88711
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler compressor with pulley assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88712
5.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the cooler compressor with pulley assembly.
Remove the O-ring from the No. 1 cooler refrigerant suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88320
6.REMOVE COOLER COMPRESSOR WITH PULLEY ASSEMBLY
Remove the 3 bolts and cooler compressor with pulley assembly.