Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › 2013.08–2017.10
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0090065 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
I109811

Using needle-nose pliers, install the cooler dryer onto the modulator.


b.
I109805

Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.

Compressor oil:

ND-OIL 8 or equivalent



c.
I109808C02
1.844,1.49 2.073,1.365 false 1.583,1.302 1.146,0.542 false 0.958,0.417 1.271,0.615 0.313,0.198 10 false *a 2.094,1.25 2.406,1.448 0.313,0.198 10 false *1
*1 Modulator
*a 14 mm Straight Hexagon Wrench


Using a 14 mm straight hexagon wrench, install the cap onto the modulator.

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)