The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified.
85222A
1.REMOVE FRONT WIPER BLADE
Disengage the claw to remove the front wiper blade as shown in the illustration.
Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield glass surface.
85214B
2.REMOVE WIPER RUBBER
Remove the wiper rubber with the front wiper rubber backing plates from the front wiper blade.
Remove the 2 front wiper rubber backing plates from the wiper rubber.
85214B
3.INSTALL WIPER RUBBER
Install the 2 front wiper rubber backing plates to the wiper rubber.
Install the front wiper rubber backing plates facing the correct direction.
Install the wiper rubber with its head portion (swelled portion) facing the arm bearing.
Push the wiper blade into the grooves of the wiper rubber to attach it completely.
85222A
4.INSTALL FRONT WIPER BLADE
Engage the claw to install the front wiper blade as shown in the illustration.