Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Front Side)
RM30M0E _59 Vehicle Exterior _017125 WIPER / WASHER _0090080 WASHER NOZZLE A

WIPER / WASHER  WASHER NOZZLE  REMOVAL  


PROCEDURE

Hide 85035 1.REMOVE WASHER NOZZLE SUB-ASSEMBLY

HINT:

Use the same procedure for both sides.


a.
B343543
0.521,2.365 1.083,2.365 true 0.333,2.292 0.646,2.448 0.313,0.156 10 false *a 1.854,1.344 2.167,1.5 0.313,0.156 10 false (1) 2.583,0.833 2.896,0.99 0.313,0.156 10 false (2)
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to separate the washer nozzle sub-assembly as shown in the illustration.


b.
B348791

Remove the washer nozzle sub-assembly from the washer hose.

NOTICE:

The washer nozzle sub-assembly cannot be reused.