Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM30M0E _53 Suspension _017095 FRONT SUSPENSION _0090096 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

a.

Fully extend the front shock absorber piston rod.


b.
C231298
1.183,1.59 1.364,1.795 0.181,0.205 10 A 2.614,1.568 2.795,1.773 0.181,0.205 10 B

Using a drill or similar tool, slowly make a hole in the area (A-B) shown in the illustration to discharge the gas inside.

CAUTION:

Always use proper safety equipment and since the discharging gas may cause chips to scatter, cover the drill with a piece of cloth when making the hole.


HINT:

The gas is colorless, odorless and harmless.