Some of these service operations affect the SRS. Read the precautionary notices concerning the SRS before servicing.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION
45184
1.INSTALL LOWER STEERING WHEEL BOSS COVER
Engage the 6 claws and install the lower steering wheel boss cover.
45116
2.INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/ Steering Wheel Ornament)
Engage the 4 claws and 5 pins and install the No. 1 steering wheel ornament.
Install the 2 screws.
84250A
3.INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)
4.PLACE FRONT WHEELS FACING STRAIGHT AHEAD
84306
5.ADJUST SPIRAL CABLE SUB-ASSEMBLY
45100
6.INSTALL STEERING WHEEL ASSEMBLY
| *a | Matchmark |
Align the matchmarks and install the steering wheel assembly to the steering main shaft.
Install the steering wheel set nut.
Connect all the connectors to the spiral cable sub-assembly.
45130
7.INSTALL HORN BUTTON ASSEMBLY (w/ Airbag System)
45130
8.INSTALL HORN BUTTON ASSEMBLY (w/o Airbag System)
Connect the horn connector.
Engage the 3 pins and install the horn button assembly.
Make sure that the pins are securely inserted into the steering holes.
Make sure to engage the 2 upper pins first.
Make sure that the horn button assembly is securely installed.
45186
9.INSTALL NO. 2 STEERING WHEEL LOWER COVER
Engage the 2 claws and install the No. 2 steering wheel lower cover.
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11.INSPECT SRS WARNING LIGHT