Home › Engine / Hybrid System › 1NZ-FE COOLING › COOLING FAN MOTOR › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017081 1NZ-FE COOLING _0090205 COOLING FAN MOTOR G

1NZ-FE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.INSPECT COOLING FAN MOTOR

a.

Disconnect the cooling fan motor connector.


b.
A305630C01
0.115,0.115 0.427,0.313 0.313,0.198 10 false *a
*a Component without harness connected
(Cooling Fan Motor)


Connect the positive (+) lead from a battery to terminal 1 and negative (-) lead to terminal 2, and check the cooling fan motor operates smoothly.

If the cooling fan motor does not operates smoothly, replace the cooling fan motor.


c.

Check the current.

i.

Measure the current while the motor is operating.

Standard Current:
Tester Connection Condition Specified Condition
Positive (+) Battery Terminal - 2 20°C (68°F) 12.4 to 15.4 A


If the result is not as specified, replace the cooling fan motor.



d.

Connect the cooling fan motor connector.