Home › Engine / Hybrid System › 1NZ-FE COOLING › COOLING FAN RESISTOR › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017081 1NZ-FE COOLING _0090206 COOLING FAN RESISTOR A

1NZ-FE COOLING  COOLING FAN RESISTOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL LH

Hide 53876A 2.SEPARATE FRONT FENDER LINER LH

a.

Remove the 3 screws and 3 clips, and separate the front side of front fender liner LH from the front bumper cover and front fender apron sub-assembly.


Hide 85928B 3.REMOVE COOLING FAN RESISTOR

a.
A108461

Disconnect the cooling fan resistor connector.


b.

Remove the 2 bolts and cooling fan resistor from the front side member reinforcement sub-assembly.