Home › Engine / Hybrid System › 1NZ-FE EMISSION CONTROL › PURGE VALVE › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017077 1NZ-FE EMISSION CONTROL _0090218 PURGE VALVE A

1NZ-FE EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 23820 1.DISCONNECT FUEL VAPOR FEED HOSE ASSEMBLY

a.
A300014

Loosen the hose clip and disconnect the fuel vapor feed hose assembly from the purge VSV.


Hide 23827A 2.DISCONNECT NO. 2 FUEL VAPOR FEED HOSE

a.
A300015

Disconnect the No. 2 fuel vapor feed hose from the purge VSV.


Hide 25860 3.REMOVE PURGE VSV

a.
A300016

Disconnect the purge VSV connector.


b.

Disengage the wire harness clamp to separate the wire harness from the purge VSV.


c.

Pull out the purge VSV from the No. 1 air cleaner hose to remove it.