Home › Engine / Hybrid System › 1NZ-FE EMISSION CONTROL › PCV VALVE › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017077 1NZ-FE EMISSION CONTROL _0090220 PCV VALVE G

1NZ-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

a.

Check the PCV valve (ventilation valve sub-assembly) operation.

i.

Install a clean hose to the PCV valve (ventilation valve sub-assembly) of the cylinder head cover sub-assembly side.


ii.
A287371C02
2.594,1.427 2.594,1.698 false 2.531,1.74 2.844,1.896 0.313,0.156 10 false *a
*a Clean Hose
V100135

Cylinder Head Cover Sub-assembly Side
V100136

Air


Blow air into the cylinder head cover sub-assembly side, and check that air passes through easily.

CAUTION:
·

Do not suck air through the valve.

·

Petroleum substances inside the valve are hazardous to your health.



If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).


iii.

Remove the clean hose from the PCV valve (ventilation valve sub-assembly) of the cylinder head cover sub-assembly side.


iv.

Install a clean hose to the PCV valve (ventilation valve sub-assembly) of the intake manifold side.


v.
A287370C02
0.729,1.313 0.729,1.583 false 0.667,1.646 0.979,1.802 0.313,0.156 10 false *a
*a Clean Hose
V100135

Intake Manifold Side
V100136

Air


Blow air into the intake manifold side, and check that air passes through with difficulty.

CAUTION:
·

Do not suck air through the valve.

·

Petroleum substances inside the valve are hazardous to your health.



If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).


vi.

Remove the clean hose from the PCV valve (ventilation valve sub-assembly) of the intake manifold side.