Home › Drivetrain › U340E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM › 2013.08–2016.10
RM30M0E _52 Drivetrain _017087 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0090604 AUTOMATIC TRANSAXLE SYSTEM U

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


C272317E09
1.25,0.25 1.667,0.5 0.417,0.25 2.583,0.25 3,0.5 0.417,0.25 4.083,0.25 4.5,0.5 0.417,0.25 5.417,0.25 5.833,0.5 0.417,0.25 1.333,0.292 1.625,0.479 0.292,0.188 10 false B29 2.688,0.292 3,0.49 0.313,0.198 10 false B31 4.156,0.292 4.448,0.469 0.292,0.177 10 false F82 5.5,0.292 5.958,0.49 0.458,0.198 10 false F83

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol) " for the terminals to be inspected. The standard voltage and resistance between the terminals is shown under "Specific Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
B29-1 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
B31-8 (ST) - B29-1 (E1) W - W-B Shift solenoid valve ST signal Shift lever in D (3rd gear ←→ 4th gear) Below 1 V ←→ 11 to 14 V
B31-9 (S2) - B29-1 (E1) BE - W-B Shift solenoid valve S2 signal Ignition switch ON Below 1 V
1st or 4th gear 11 to 14 V
2nd or 3rd gear Below 1 V
B31-10 (S1) - B29-1 (E1) V - W-B Shift solenoid valve S1 signal Ignition switch ON 11 to 14 V
1st or 2nd gear 11 to 14 V
3rd or 4th gear Below 1 V
B31-11 (SL) - B29-1 (E1) R - W-B SL solenoid signal Ignition switch ON Below 1 V
Vehicle driving under lock up range 11 to 14 V
B31-12 (SLT+) - B31-13 (SLT-) P - L Shift solenoid valve SLT signal Engine idling speed Pulse generation
B31-16 (L) - B29-1 (E1) G - W-B L shift position switch signal Ignition switch ON and shift lever in L 11 to 14 V
Ignition switch ON and shift lever not in L Below 1 V
B31-17 (R) - B29-1 (E1) R - W-B R shift position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
B31-18 (2) - B29-1 (E1) LG - W-B 2 shift position switch signal Ignition switch ON and shift lever in 2 11 to 14 V
Ignition switch ON and shift lever not in 2 Below 1 V
B31-24 (THO1) - B31-32 (ETHO) Y - B ATF (Automatic Transmission Fluid) temperature sensor signal ATF temperature: 10°C
(50°F) to 145°C (293°F)
4 to 0 V
B31-26 (N) - B29-1 (E1) V - W-B N shift position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
B31-34 (P) - B29-1 (E1) P - W-B P shift position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
B31-35 (NT+) - B31-27 (NT-) B - G Transmission revolution sensor (NT) signal Driving at approximately 20 km/h (12 mph) Pulse generation
(See waveform 3)
F82-8 (3) - B29-1 (E1) GR - W-B 3 shift position switch signal Ignition switch ON and shift lever in 3 11 to 14 V
Ignition switch ON and shift lever not in 3 Below 1 V
F82-9 (NSW) - B29-1 (E1) L - W-B Park/Neutral position switch signal Ignition switch ON and shift lever in P or N Below 1 V
Ignition switch ON and shift lever not in P and N 11 to 14 V
F82-21 (D) - B29-1 (E1) L - W-B D shift position switch signal Ignition switch ON and shift lever in D or 3 11 to 14 V
Ignition switch ON and shift lever not in D and 3 Below 1 V
F82-33 (CANH) - B29-1 (E1) BE - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 1)
F82-34 (CANL) - B29-1 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 2)
F83-1 (+B) - B29-1 (E1) R - W-B Power source of ECM Ignition switch ON 11 to 14 V
F83-2 (+B2) - B29-1 (E1) R - W-B Power source of ECM Ignition switch ON 11 to 14 V
F83-4 (BATT) - B29-1 (E1) G - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V

a.
C279785E06
2.833,1.458 3.292,1.656 0.458,0.198 10 false GND

Waveform 1 (Reference)

Terminal CANH - E1
Tool setting 1 V/DIV., 10 μs/DIV.
Vehicle conditions Ignition switch ON


b.
C279786E06
2.833,1.427 3.292,1.625 0.458,0.198 10 false GND

Waveform 2 (Reference)

Terminal CANL - E1
Tool setting 1 V/DIV., 10 μs/DIV.
Vehicle conditions Ignition switch ON


c.
C279784E06
2.781,0.979 3.24,1.177 0.458,0.198 10 false GND

Waveform 3

Terminal NT+ - NT-
Tool setting 2 V/DIV., 1 ms/DIV.
Vehicle conditions Driving at approximately 20 km/h (12 mph)