1.INSPECT AUTOMATIC TRANSAXLE FLUID
Drive the vehicle so that the engine assembly and automatic transaxle assembly are at normal operating temperature.
70 to 80°C (158 to 176°F)
| *a | OK |
| *b | Add |
Park the vehicle on a level surface and apply the parking brake.
With the engine idling and the brake pedal depressed, move the shift lever to all positions from P to L. Then return it to P.
Pull out the transmission oil level dipstick sub-assembly and wipe it clean.
Push it back fully into the transmission oil filler tube sub-assembly.
Pull it out again and check that the fluid level is within the HOT range.
If there are leaks, it is necessary to repair or replace O-rings, seal packing, oil seals, plugs or other parts.