Home › Drivetrain › U340E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH › 2013.08–2016.10
RM30M0E _52 Drivetrain _017087 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0090609 PARK / NEUTRAL POSITION SWITCH G

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH

a.

Apply the parking brake and turn the ignition switch to ON.


b.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in the other positions.


c.

Check that the back-up lights illuminate when the shift lever is in R, and that they do not illuminate with the shift lever in the other positions.

If a malfunction or failure is found, inspect the park/neutral position switch for continuity.