Home › Drivetrain › U340E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER › 2013.08–2014.03
RM30M0E _52 Drivetrain _017087 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0090610 SHIFT LEVER A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REMOVAL  


PROCEDURE

Hide 33820B 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Apply the parking brake and move the shift lever to N.


b.
C286312

Disconnect the end of the transmission control cable assembly from the transmission floor shift assembly.


c.
C286314C02
0.615,1.427 0.688,1.208 false 0.552,1.438 0.865,1.594 0.313,0.156 10 false *1
*1 Nut
V100135

Rotate approximately 180°
V100136

Pull out


Rotate the nut of the transmission control cable assembly approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the transmission floor shift assembly.

NOTICE:

Rotating the nut too much will damage the internal spring, and the transmission control cable assembly will not be reusable. Do not turn the nut too far.



Hide 33550 3.REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

a.
C286316

Disconnect the 2 connectors from the transmission floor shift assembly.


b.

Disengage the 2 clamps and separate the wire harness from the transmission floor shift assembly.


c.
C286317

Remove the 4 bolts and transmission floor shift assembly from the body.