Home › Drivetrain › U340E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER › 2013.08–2016.10
RM30M0E _52 Drivetrain _017087 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0090610 SHIFT LEVER G

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

Turn the ignition switch to ON and depress the brake pedal.


b.

Confirm that the shift lever moves smoothly through all of the shift positions and the position indicator shows the correct shift lever position.


c.

Start the engine and make sure that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.

If the operation cannot be done as specified, inspect and adjust the park/neutral position switch and shift lever position.


Hide 2.INSPECT SHIFT LOCK OPERATION

a.

Move the shift lever to P.


b.

Turn the ignition switch off.


c.

Check that the shift lever cannot be moved from P to any other position.


d.

Check that the shift lever can be moved from P when the ignition switch is ON and the brake pedal is depressed.

If the operation cannot be done as specified, inspect the shift lock control unit assembly.


Hide 3.INSPECT SHIFT LOCK RELEASE BUTTON OPERATION

a.

Move the shift lever to P.


b.

Turn the ignition switch off.


c.

Remove the shift lock release button cover.


d.

Press the No. 2 shift lock release button and check that the shift lever can be moved to any position from P.

If the operation cannot be done as specified, inspect the shift lock control unit assembly.


Hide 4.INSPECT KEY INTERLOCK OPERATION (w/o Smart Entry and Start System)

a.

Turn the ignition switch to ON.


b.

Depress the brake pedal and check that the shift lever can be moved to any other position from P.


c.

Check that the ignition key cannot be turned to LOCK.


d.

Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.

If the operation cannot be done as specified, inspect the shift lock control unit assembly.