Home › Drivetrain › U441E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY › 2013.08–2016.10
RM30M0E _52 Drivetrain _017088 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0090622 VALVE BODY ASSEMBLY A

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 35290 1.INSTALL SHIFT SOLENOID VALVE SLT

a.
C286295

Install the shift solenoid valve SLT to the transmission valve body assembly with the bolt.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 35250D 2.INSTALL SHIFT SOLENOID VALVE ST

a.
C286298

Apply a light coat of Toyota Genuine ATF Type T-IV to a new O-ring and install it to the shift solenoid valve ST.

NOTICE:

Do not twist the O-ring.



b.

Install the shift solenoid valve ST to the transmission valve body assembly with the bolt.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.



Hide 35250A 3.INSTALL SHIFT SOLENOID VALVE SL

a.
C293485

Apply a light coat of Toyota Genuine ATF Type T-IV to a new O-ring and install it to the shift solenoid valve SL.

NOTICE:

Do not twist the O-ring.



b.

Install the sleeve to the shift solenoid valve SL.

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.



c.
C244598

Install the shift solenoid valve SL to the transmission valve body assembly with the bolt.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


d.
C203896

Install the solenoid lock plate to the transmission valve body assembly with the 2 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 4.INSTALL SHIFT SOLENOID VALVE S2

a.
C286297

Apply a light coat of Toyota Genuine ATF Type T-IV to a new O-ring and install it to the shift solenoid valve S2.

NOTICE:

Do not twist the O-ring.



b.

Install the shift solenoid valve S2 to the transmission valve body assembly with the bolt.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.



Hide 35250C 5.INSTALL SHIFT SOLENOID VALVE S1

a.
C286296

Apply a light coat of Toyota Genuine ATF Type T-IV to a new O-ring and install it to the shift solenoid valve S1.

NOTICE:

Do not twist the O-ring.



b.

Install the shift solenoid valve S1 to the transmission valve body assembly with the bolt.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.