Home › Drivetrain › U441E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER › 2013.08–2016.10
RM30M0E _52 Drivetrain _017088 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0090624 SHIFT LEVER A

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


PROCEDURE

Hide 33866 1.INSTALL NO. 1 SHIFT LOCK RELEASE SPRING

a.

Install the No. 1 shift lock release spring to the No. 1 shift lock release button.


Hide 33563 2.INSTALL NO. 1 SHIFT LOCK RELEASE BUTTON

a.
C286329

Engage the 3 claws and install the No. 1 shift lock release button to the shift lock control unit assembly.


Hide 35974 3.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C286328

Engage the 4 claws and install the lower position indicator housing to the shift lock control unit assembly.


Hide 35976 4.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.
C282040

Align the cutouts on the shank of the No. 2 position indicator slide cover and No. 1 position indicator slide cover, and install the No. 2 position indicator slide cover to the No. 1 position indicator slide cover.


Hide 35975 5.INSTALL NO. 1 POSITION INDICATOR SLIDE COVER

a.
C286326C01
2.76,1.125 2.948,1.229 false 3,1.146 3.313,1.302 0.313,0.156 10 false *a
*a Alignment Mark
V100136

Front Side of Vehicle


Install the No. 1 position indicator slide cover to the lower position indicator housing.

NOTICE:

Install the position indicator slide cover so that its alignment mark points to the front of the vehicle.



Hide 35971E 6.INSTALL POSITION INDICATOR HOUSING

a.
C286324

Engage the 4 claws and install the position indicator housing to the lower position indicator housing.


Hide 33866 7.INSTALL NO. 2 SHIFT LOCK RELEASE SPRING

a.

Install the No. 2 shift lock release spring to the No. 2 shift lock release button.


Hide 33563 8.INSTALL NO. 2 SHIFT LOCK RELEASE BUTTON

a.
C286323

Engage the 2 claws and install the No. 2 shift lock release button to the position indicator light housing.


Hide 33502S 9.INSTALL SHIFT LOCK RELEASE BUTTON COVER

a.
C286322

Engage the 2 claws and install the shift lock release button cover to the upper position indicator housing.


Hide 35921 10.INSTALL CONTROL POSITION INDICATOR PLATE

a.
C286321

Install the control position indicator plate to the upper position indicator housing.


Hide 35961 11.INSTALL POSITION INDICATOR LIGHT HOUSING

a.
C286320

Install the position indicator light housing to the upper position indicator housing with the 2 screws.

Torque:
0.7 N*m (7 kgf*cm, 6 in.*lbf)


Hide 35906 12.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY (for LHD)

a.
C286319

Turn the indicator light wire sub-assembly clockwise and install it to the position indicator light housing.


b.

Engage the 4 clamps and install the indicator light wire sub-assembly to the position indicator light housing and upper position indicator housing.


Hide 35906 13.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY (for RHD)

a.
C282031

Turn the indicator light wire sub-assembly clockwise and install it to the position indicator light housing.


b.

Engage the 2 clamps and install the indicator light wire sub-assembly to the position indicator light housing.