35301A
1.INSTALL FRONT OIL PUMP OIL SEAL
Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body.
-0.15 to 0.15 mm (-0.00590 to 0.00590 in.)
Coat the lip of the front oil pump oil seal with MP grease.
35322
2.INSTALL FRONT OIL PUMP DRIVEN GEAR
Coat the front oil pump driven gear with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.
35321
3.INSTALL FRONT OIL PUMP DRIVE GEAR
Coat the front oil pump drive gear with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.
35370
4.INSTALL STATOR SHAFT ASSEMBLY
Install the stator shaft assembly to the front oil pump body with the 8 bolts.
5.INSPECT OIL PUMP ASSEMBLY
Using 2 screwdrivers, make sure that the front oil pump drive gear turns smoothly.
If the front oil pump drive gear does not turn smoothly, inspect the front oil pump gear clearance.
Do not damage the lip of the front oil pump oil seal.
35301B
6.INSTALL FRONT OIL PUMP BODY O-RING
Coat a new front oil pump body O-ring with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.
Do not twist the O-ring.