1.INSPECT FRONT DIFFERENTIAL SIDE GEAR BACKLASH
Using a dial indicator, measure the front differential side gear backlash while holding one of the front differential pinions toward the front differential case.
0.05 to 0.20 mm (0.00197 to 0.00787 in.)
If the backlash is not as specified, replace the front differential side gear thrust washers.
| Part No. | Thickness
mm (in.) |
|---|---|
| 41361-52010 | 1.50 (0.0591) |
| 41361-52020 | 1.55 (0.0610) |
| 41361-52030 | 1.60 (0.0630) |
| 41361-52040 | 1.65 (0.0650) |
| 41361-52050 | 1.70 (0.0669) |
| 41361-52060 | 1.75 (0.0689) |
Measure the thickness with a micrometer to select a proper front differential side gear thrust washer because the front differential side gear thrust washers do not have any distinguishing marks.
Select front differential side gear thrust washers of the same thickness for both the right and left sides.