Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM(for Start Function)
RM30M0E _58 Vehicle Interior _017111 THEFT DETERRENT / KEYLESS ENTRY _0090850 SMART ENTRY AND START SYSTEM(for Start Function) D

THEFT DETERRENT / KEYLESS ENTRY  SMART ENTRY AND START SYSTEM(for Start Function)  DTC CHECK / CLEAR  


NOTICE:

If the GTS is connected to the vehicle with the engine switch off, the information stored in smart entry and start system related ECUs cannot be read. However, smart entry and start system DTCs and Data List information can be confirmed even if the engine switch is off using the method below:

·

When using the GTS with the engine switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry&Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

·

Connect the GTS to the vehicle, select the vehicle type under manual mode, and then enter the following menus: Body Electrical / Entry&Start / Trouble Codes.



CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [POWER SOURCE CONTROL])


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.


e.

Check for DTCs.

Body Electrical > Power Source Control > Trouble Codes
50001 223
HINT:

Refer to the GTS operator's manual for further details.




CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [STARTING CONTROL])


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Starting Control / Trouble Codes.


e.

Check for DTCs.

Body Electrical > Starting Control > Trouble Codes
50001 221
HINT:

Refer to the GTS operator's manual for further details.




CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [ENTRY&START])


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.


e.

Check for DTCs.

Body Electrical > Entry&Start > Trouble Codes
50001 125
HINT:

Refer to the GTS operator's manual for further details.




CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [POWER SOURCE CONTROL])


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.


e.

Clear the DTCs by following the directions on the GTS display.

Body Electrical > Power Source Control > Clear DTCs
50002 223
HINT:

Refer to the GTS operator's manual for further details.




CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [STARTING CONTROL])


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Starting Control / Trouble Codes.


e.

Clear the DTCs by following the directions on the GTS display.

Body Electrical > Starting Control > Clear DTCs
50002 221
HINT:

Refer to the GTS operator's manual for further details.




CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [ENTRY&START])


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.


e.

Clear the DTCs by following the directions on the GTS display.

Body Electrical > Entry&Start > Clear DTCs
50002 125
HINT:

Refer to the GTS operator's manual for further details.