Home › Engine / Hybrid System › 2NZ-FE ENGINE MECHANICAL › DRIVE BELT › 2013.08–2016.07
RM30M0E _51 Engine / Hybrid System _017074 2NZ-FE ENGINE MECHANICAL _0091011 DRIVE BELT A

2NZ-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 51441C 1.REMOVE ENGINE UNDER COVER RH (w/o Metal Type Under Cover)

a.

Remove the 2 bolts, 4 screws and engine under cover RH from the vehicle.


Hide 51451A 2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 16361A 4.REMOVE FAN AND GENERATOR V BELT

a.
A111164E01
2.281,0.365 2.438,0.563 0.156,0.198 10 false A 1.969,1.948 2.125,2.146 0.156,0.198 10 false B

Loosen the bolts A and B.


b.

Release the fan and generator V belt tension and remove the fan and generator V belt from each pulley.