Wash off clutch fluid immediately if it comes in contact with any painted surface.
44610
1.REMOVE BRAKE BOOSTER ASSEMBLY
31434C
2.DISCONNECT CLUTCH RESERVOIR TUBE
Loosen the hose clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.
Use a container to collect the fluid.
31481
3.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE
Using a 10 mm union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.
Use a container to collect the fluid.
31453
4.DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS
31410
5.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
Remove the 2 nuts and clutch master cylinder assembly from the body.
31453
6.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS
| *1 | Lock Nut |
| *2 | Clutch Master Cylinder Push Rod Clevis |
Measure the dimension A as shown in the illustration before loosening the lock nut.
Loosen the lock nut and remove the clutch master cylinder push rod clevis from the clutch master cylinder assembly.
When loosening the lock nut, be sure to hold the clutch master cylinder push rod clevis in place by its square portion.
Remove the lock nut from the clutch master cylinder assembly.