Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER
RM30M0E _52 Drivetrain _017089 CLUTCH _0091139 CLUTCH RELEASE CYLINDER A

CLUTCH  CLUTCH RELEASE CYLINDER  DISASSEMBLY  


PROCEDURE

Hide 31478 1.REMOVE RELEASE CYLINDER BLEEDER PLUG CAP

a.

Remove the release cylinder bleeder plug cap from the release cylinder bleeder plug.


Hide 31477 2.REMOVE RELEASE CYLINDER BLEEDER PLUG

a.

Remove the release cylinder bleeder plug from the release cylinder body.


Hide 04313 3.REMOVE RELEASE CYLINDER PISTON

a.
C235147
0.438,0.917 0.438,0.688 false 1.115,1.188 1.115,0.958 false 1.854,1.521 1.854,1.188 false 2.656,1.927 2.656,1.698 false 0.375,0.917 0.688,1.073 0.313,0.156 10 false *1 1.063,1.198 1.375,1.354 0.313,0.156 10 false *2 1.802,1.521 2.115,1.677 0.313,0.156 10 false *3 2.604,1.927 2.917,2.083 0.313,0.156 10 false *4
*1 Compression Spring
*2 Release Cylinder Piston
*3 Release Cylinder Push Rod
*4 Release Cylinder Boot


Remove the release cylinder boot and release cylinder push rod from the release cylinder body.


b.

Remove the release cylinder boot from the release cylinder push rod.


c.

Remove the release cylinder piston and compression spring from the release cylinder body.

NOTICE:

Do not damage the inside of the release cylinder body.