Home › Drivetrain › CLUTCH › CLUTCH UNIT(for C50) › 2013.08–2016.04
RM30M0E _52 Drivetrain _017089 CLUTCH _0091140 CLUTCH UNIT(for C50) A

CLUTCH  CLUTCH UNIT(for C50)  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C283233

Disengage the clutch release fork sub-assembly from the release fork support.


b.

Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transaxle assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
C283235

Disengage the release bearing hub clip and remove the clutch release bearing assembly from the clutch release fork sub-assembly.


Hide 31232A 4.REMOVE RELEASE BEARING HUB CLIP

a.

Remove the release bearing hub clip from the clutch release bearing assembly.


Hide 31126 5.REMOVE CLUTCH RELEASE FORK BOOT

a.
C283236

Remove the clutch release fork boot from the manual transaxle assembly.


Hide 31236B 6.REMOVE RELEASE FORK SUPPORT

a.
C155093

Using a 19 mm deep socket wrench, remove the release fork support from the manual transaxle assembly.


Hide 31210 7.REMOVE CLUTCH COVER ASSEMBLY

a.
C283237C01
1.125,0.75 0.792,0.865 0.792,0.865 1.063,0.708 true 0.635,0.76 0.948,0.917 0.313,0.156 10 false *a
*a Matchmark


Put the matchmarks on the clutch cover assembly and flywheel sub-assembly.


b.

Loosen each bolt one turn at a time until the spring tension is released.


c.

Remove the 6 bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250B 8.REMOVE CLUTCH DISC ASSEMBLY

a.

Remove the clutch disc assembly.

NOTICE:

Keep the lining part of the clutch disc assembly, the pressure plate of the clutch cover assembly and the surfaces of the flywheel sub-assembly free of oil and foreign matter.