Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH › 2013.08–2016.04
RM30M0E _52 Drivetrain _017089 CLUTCH _0091142 CLUTCH PEDAL SWITCH A

CLUTCH  CLUTCH PEDAL SWITCH  INSTALLATION  


PROCEDURE

Hide 84520 1.INSTALL CLUTCH START SWITCH ASSEMBLY

a.

Install the clutch start switch assembly to the clutch pedal support sub-assembly with the nut.

Torque:
15.7 N*m (160 kgf*cm, 12 ft.*lbf)

NOTICE:
·

Insert the protrusion of the clutch start switch assembly into the hole in the clutch pedal support sub-assembly.

·

To prevent damage to the clutch start switch assembly, make sure not to rotate it during installation.




b.

Connect the connector to the clutch start switch assembly.


Hide 2.INSPECT CLUTCH START SYSTEM