58910C
1.REMOVE REAR CONSOLE BOX ASSEMBLY
33820B
2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
| *1 | Clip A |
| *2 | Clip B |
| *3 | Nut |
|
Rotate approximately 180° |
Remove the clip A and disconnect the select cable end of the transmission control cable assembly from the floor shift shift lever assembly.
Widen the clip B and disconnect the shift cable end of the transmission control cable assembly from the floor shift shift lever assembly.
Rotate the 2 nuts of the transmission control cable assembly approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the floor shift shift lever assembly.
Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.
33530F
3.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY
Disengage the 2 clamps and separate the wire harness from the floor shift shift lever assembly.
Remove the 4 bolts and floor shift shift lever assembly from the body.