11101J
1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Warm up the engine.
Turn the A/C switch on.
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).
| Tester Display |
|---|
| Control the VVT Linear (Bank1) |
Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.
| GTS Operation | Specified Condition |
|---|---|
| 0% | Normal engine speed |
| 100% | Engine idles roughly or stalls |
If the result is not acceptable, cool the engine (engine coolant temperature is 50°C (122°F) or less) and perform the Active Test again.
DTCs related to the VVT system may be stored due to Active Test operation, but this does not indicate a malfunction.
If the result is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.