Home › Engine / Hybrid System › 2NZ-FE ENGINE CONTROL › MASS AIR FLOW METER › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017072 2NZ-FE ENGINE CONTROL _0091222 MASS AIR FLOW METER A

2NZ-FE ENGINE CONTROL  MASS AIR FLOW METER  REMOVAL  


PROCEDURE

Hide 22204 1.REMOVE MASS AIR FLOW METER

a.
A171163

Disconnect the mass air flow meter connector.


b.

Remove the 2 screws and mass air flow meter from the air cleaner cap.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the mass air flow meter.



c.
A171164

Remove the O-ring from the mass air flow meter.