Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Fixed Seat Type) › 2013.08–2018.01
RM30M0E _58 Vehicle Interior _017116 SEAT _0092021 REAR SEAT ASSEMBLY(for Fixed Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fixed Seat Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR SEATBACK ASSEMBLY

a.

Place the rear seatback assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Engage the 3 hooks to install the rear seatback assembly.


c.

Install the 3 bolts.

Torque:
7.9 N*m (81 kgf*cm, 70 in.*lbf)


d.

Connect the rear seat 3 point type outer belt assembly LH, rear seat 3 point type outer belt assembly RH and rear seat inner with center belt assembly LH into the 3 rear seat shoulder belt guides. (for 3 Point Type Rear Center Seat Belt)


e.

Connect the rear seat 3 point type outer belt assembly LH and rear seat 3 point type outer belt assembly RH into the 2 rear seat shoulder belt guides. (for 2 Point Type Rear Center Seat Belt)


Hide 73480 2.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for 3 Point Type Rear Center Seat Belt)

B348218C01
2.177,0.385 1.948,0.583 true 1.917,1.458 1.74,1.313 true 2.198,0.281 2.51,0.479 0.313,0.198 10 false *a 1.896,1.49 2.208,1.688 0.313,0.198 10 false *b
*a Convex
*b Arrow Mark


a.

Connect the rear seat inner with center belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the anchor plate with the arrow mark facing forward.

·

Do not place the anchor plate over the convex area of the floor panel.




Hide 72693 3.INSTALL REAR SEAT CUSHION LOCK HOOK

a.

Engage the 4 claws to install the 2 rear seat cushion lock hooks.


Hide 4.INSTALL REAR SEAT CUSHION ASSEMBLY

a.

Pass the rear seat inner belt through the slit of the rear seat cushion assembly.

NOTICE:

Be careful not to damage the vehicle body.



b.
B343468C01
1.104,1.042 0.813,1.271 true 2.448,1.573 2.198,1.833 true 0.708,1.625 1,1.625 false 2.031,2.26 2.302,2.125 false 0.656,1.24 0.969,1.396 0.313,0.156 10 false *1 1.031,1.51 1.344,1.667 0.313,0.156 10 false *2 2.063,1.844 2.281,2.021 0.219,0.177 10 false *1 2.323,2 2.635,2.156 0.313,0.156 10 false *2
*1 Rear Side of Rear Seat Cushion Frame Hook
*2 Rear Seat Cushion Lock Hook


Align the rear side of the rear seat cushion frame with the 2 hooks.


c.

Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion assembly.

NOTICE:

When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.