1.REMOVE REAR SEAT CUSHION ASSEMBLY
| *1 | Rear Side of Rear Seat Cushion Frame Hook |
| *2 | Rear Seat Cushion Lock Hook |
Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.
Be sure hold the part of the rear seat cushion assembly directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the cushion can deform the rear seat cushion frame.
Pass the rear seat inner belt through the slit of the rear seat cushion assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion assembly.
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
Disengage the 4 claws to remove the 2 rear seat cushion lock hooks.
73480
3.DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for 3 Point Type Rear Center Seat Belt)
Remove the bolt and disconnect the floor anchor of the rear seat inner with center belt assembly LH.
4.REMOVE REAR SEATBACK ASSEMBLY
Disconnect the rear seat 3 point type outer belt assembly LH, rear seat 3 point type outer belt assembly RH and rear seat inner with center belt assembly LH from the 3 rear seat shoulder belt guides. (for 3 Point Type Rear Center Seat Belt)
Disconnect the rear seat 3 point type outer belt assembly LH and rear seat 3 point type outer belt assembly RH from the 2 rear seat shoulder belt guides. (for 2 Point Type Rear Center Seat Belt)
Remove the 3 bolts.
Disengage the 3 hooks to remove the rear seatback assembly.