Home › Engine / Hybrid System › 2NZ-FE FUEL › FUEL PUMP › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017076 2NZ-FE FUEL _0092330 FUEL PUMP A

2NZ-FE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

a.
A311724

While holding the fuel pump filter by the plastic resin part, install the fuel pump to the fuel pump filter.

NOTICE:

Be careful not to let foreign matter enter the fuel pump or fuel pump filter.



b.
A311723C01
1.146,0.281 1.396,0.281 false 1.167,0.719 1.417,0.719 false 0.99,0.208 1.302,0.406 0.313,0.198 10 false *1 1,0.635 1.313,0.833 0.313,0.198 10 false *2
*1 O-ring
*2 Fuel Pump Spacer


Apply gasoline to a new O-ring and then install the fuel pump spacer and O-ring to the fuel pump.

NOTICE:

Make sure the O-ring is not damaged and has no foreign matter stuck to it.



c.
A311721

Engage the 3 claws to install the fuel pump and fuel pump filter to the No. 1 fuel suction support.

NOTICE:

Do not push the filter part of the fuel pump filter.



Hide 77785 2.INSTALL FUEL PUMP HARNESS

a.
A311722

Connect the 2 connectors to install the fuel pump harness to the fuel suction tube assembly and fuel pump.


Hide 83320 3.INSTALL FUEL SENDER GAUGE ASSEMBLY