25860
1.INSTALL PURGE VSV
Insert the purge VSV into the No. 1 air cleaner hose to install it.
Engage the wire harness clamp to connect the wire harness to the purge VSV.
Connect the purge VSV connector.
23827A
2.CONNECT NO. 2 FUEL VAPOR FEED HOSE
| *1 | Purge VSV |
| *2 | No. 2 Fuel Vapor Feed Hose |
| *a | Paint Mark |
| *b | Front of Vehicle |
Connect the No. 2 fuel vapor feed hose to the purge VSV as shown in the illustration.
23820
3.CONNECT FUEL VAPOR FEED HOSE ASSEMBLY
| *a | View A |
| *b | Paint Mark |
| *c | Front of Vehicle |
Connect the fuel vapor feed hose assembly to the purge VSV with the hose clip as shown in the illustration.