12204
1.INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
Check the PCV valve (ventilation valve sub-assembly) operation.
Install a clean hose to the PCV valve (ventilation valve sub-assembly) of the cylinder head cover sub-assembly side.
| *a | Clean Hose |
|
Cylinder Head Cover Sub-assembly Side |
|
Air |
Blow air into the cylinder head cover sub-assembly side, and check that air passes through easily.
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).
Remove the clean hose from the PCV valve (ventilation valve sub-assembly) of the cylinder head cover sub-assembly side.
Install a clean hose to the PCV valve (ventilation valve sub-assembly) of the intake manifold side.
| *a | Clean Hose |
|
Intake Manifold Side |
|
Air |
Blow air into the intake manifold side, and check that air passes through with difficulty.
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).
Remove the clean hose from the PCV valve (ventilation valve sub-assembly) of the intake manifold side.