Home › Engine / Hybrid System › 2NZ-FE COOLING › COOLING FAN RESISTOR › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017082 2NZ-FE COOLING _0092344 COOLING FAN RESISTOR G

2NZ-FE COOLING  COOLING FAN RESISTOR  INSPECTION  


PROCEDURE

Hide 85928B 1.INSPECT COOLING FAN RESISTOR

a.
A198875C03
0.127,0.129 0.373,0.315 0.246,0.185 10 *a
*a Component without harness connected
(Cooling Fan Resistor)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.17 to 1.43 Ω


If the result is not as specified, replace the cooling fan resistor.