53141F
1.REMOVE RADIATOR COVER
Remove the 8 clips and the radiator cover.
53101
2.REMOVE RADIATOR GRILLE SUB-ASSEMBLY
| *1 | Hood Center Cushion |
Remove the 4 clips.
Remove the hood center cushion.
Disengage the 6 claws and remove the radiator grille sub-assembly.
3.REMOVE FRONT BUMPER ASSEMBLY
|
Protective Tape |
Apply protective tape as shown in the illustration.
| *1 | Pin Hold Clip |
| *a | 90° |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
Use the same procedure for the RH side and LH side.
Remove the clip.
Use the same procedure for the RH side and LH side.
Remove the 6 screws.
Using a clip remover, remove the 3 clips.
Disengage the 8 claws and remove the front bumper assembly.
w/ Fog Light:
Disconnect the fog light assembly connectors.
Remove the 2 nuts.