76852A
1.REMOVE FRONT SPOILER COVER LH (w/ Front Spoiler)
76851A
2.REMOVE FRONT SPOILER COVER RH (w/ Front Spoiler)
Use the same procedure as for the LH side.
52521A
3.REMOVE FRONT BUMPER RETAINER CLIP
Remove the front bumper retainer clip.
Use the same procedure for the RH side and LH side.
53879A
4.REMOVE FRONT FENDER LINER RETAINER
Remove the front fender liner retainer.
Use the same procedure for the RH side and LH side.
5.REMOVE CLIP (w/ Front Spoiler)
Remove the 2 clips.
Use the same procedure for the RH side and LH side.
6.REMOVE GROMMET
Remove the 4 grommets.
7.REMOVE RADIATOR GRILLE EMBLEM
Disengage the 4 claws and 2 guides, and remove the radiator grille emblem.
53124C
8.REMOVE UPPER RADIATOR GRILLE MOULDING LH
Disengage the 2 claws and remove the upper radiator grille moulding LH.
53121F
9.REMOVE UPPER RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
53124E
10.REMOVE LOWER RADIATOR GRILLE MOULDING LH
Disengage the 2 claws and remove the lower radiator grille moulding LH.
53123E
11.REMOVE LOWER RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
53111E
12.REMOVE RADIATOR GRILLE MOULDING LH
Remove the screw.
Disengage the 3 claws and remove the radiator grille moulding LH.
53111D
13.REMOVE RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
52127C
14.REMOVE FRONT BUMPER HOLE COVER
Disengage the 4 claws and the guide.
Disengage the claw and remove the front bumper hole cover.
53112E
15.REMOVE LOWER NO. 1 RADIATOR GRILLE
Remove the 2 screws.
Disengage the 20 claws and remove the lower No. 1 radiator grille.
81220
16.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
Remove the 2 screws.
Disengage the guide and remove the fog light assembly LH.
81210A
17.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
52128B
18.REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)
Disengage the 4 claws and remove the front bumper hole cover LH.
52127D
19.REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)
Use the same procedure as for the LH side.
52128B
20.REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Disengage the 4 claws and remove the front bumper hole cover LH.
52127D
21.REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure as for the LH side.
52536
22.REMOVE FRONT BUMPER SIDE RETAINER LH
Remove the bolt.
Disengage the claw and remove the front bumper side retainer LH.
52535
23.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
88891H
24.REMOVE NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)
Remove the 2 clips.
Disengage the 2 guides and remove the No. 1 cooler cover.
88790B
25.REMOVE THERMISTOR ASSEMBLY (for Automatic Air Conditioning System)
53286B
26.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Disconnect the connector.
Disengage the clamp and separate the wire harness.
Remove the clip.
Disengage the 2 claws and remove the No. 2 radiator side air seal.
53285B
27.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Use the same procedure as for the No. 2 radiator side air seal side.
53286B
28.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Disconnect the connector.
Disengage the clamp and separate the wire harness.
Remove the clip.
Disengage the 3 claws and remove the No. 2 radiator side air seal.
53285B
29.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Use the same procedure as for the No. 2 radiator side air seal side.
52611
30.REMOVE FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber)
Disengage the 2 guides and remove the front bumper energy absorber.
53288B
31.REMOVE RADIATOR SUPPORT EXTENSION LH
Remove the clip.
Disengage the 2 claws and remove the radiator support extension LH.
53287B
32.REMOVE RADIATOR SUPPORT EXTENSION RH
Use the same procedure as for the LH side.
52021
33.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for LHD)
Disengage the 4 clamps and separate the wire harness.
Remove the 5 nuts and the front bumper reinforcement sub-assembly.
52021
34.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for RHD)
Disengage the 3 clamps and separate the wire harness.
Remove the 5 nuts and the front bumper reinforcement sub-assembly.