Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(for Sedan) › 2013.08–2016.04
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0092434 FRONT BUMPER(for Sedan) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Sedan)  REASSEMBLY  


PROCEDURE

Hide 52021 1.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for LHD)

a.
B347345

Install the front bumper reinforcement sub-assembly with the 5 nuts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


b.

Engage the 4 clamps and install the wire harness.


Hide 52021 2.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for RHD)

a.
B342288

Install the front bumper reinforcement sub-assembly with the 5 nuts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


b.

Engage the 3 clamps and install the wire harness.


Hide 53288B 3.INSTALL RADIATOR SUPPORT EXTENSION LH

B342284

a.

Engage the 2 claws and install the radiator support extension LH.


b.

Install the clip.


Hide 53287B 4.INSTALL RADIATOR SUPPORT EXTENSION RH

HINT:

Use the same procedure as for the LH side.


Hide 52611 5.INSTALL FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber)

a.
B205188

Engage the 2 guides and install the front bumper energy absorber.


Hide 53286B 6.INSTALL NO. 2 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)

a.
B205186

Engage the 2 claws and install the No. 2 radiator side air seal.


b.
B205187

Install the clip.


c.

Engage the clamp and install the wire harness.


d.

Connect the connector.


Hide 53285B 7.INSTALL NO. 1 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)

HINT:

Use the same procedure as for the No. 2 radiator side air seal side.


Hide 53286B 8.INSTALL NO. 2 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)

a.
B342283

Engage the 3 claws and install the No. 2 radiator side air seal.


b.
B342282

Install the clip.


c.

Engage the clamp and install the wire harness.


d.

Connect the connector.


Hide 53285B 9.INSTALL NO. 1 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)

HINT:

Use the same procedure as for the No. 2 radiator side air seal side.


Hide 88790B 10.INSTALL THERMISTOR ASSEMBLY (for Automatic Air Conditioning System)

Hide 88891H 11.INSTALL NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)

a.
B342285

Engage the 2 guides and install the No. 1 cooler cover with the 2 clips.


Hide 52536 12.INSTALL FRONT BUMPER SIDE RETAINER LH

a.
B357984

Engage the claw and install the front bumper side retainer LH.


b.

Install the bolt.


Hide 52535 13.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52128B 14.INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)

a.
B342281

Engage the 4 claws and install the front bumper hole cover LH.


Hide 52127D 15.INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 52128B 16.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)

a.
B342279

Engage the 4 claws and install the front bumper hole cover LH.


Hide 52127D 17.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 81220 18.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

B347473

a.

Engage the guide and install the fog light assembly LH with the 2 screws.


Hide 81210A 19.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 53112E 20.INSTALL LOWER NO. 1 RADIATOR GRILLE

a.
B342277

Engage the 20 claws and install the lower No. 1 radiator grille.


b.

Install the 2 screws.


Hide 52127C 21.INSTALL FRONT BUMPER HOLE COVER

a.

Engage the claw.


b.
B342273

Engage the 4 claws and guide and install the front bumper hole cover.


Hide 53111E 22.INSTALL RADIATOR GRILLE MOULDING LH

a.
B348873

Engage the 3 claws and install the radiator grille moulding LH.


b.

Install the screw.


Hide 53111D 23.INSTALL RADIATOR GRILLE MOULDING RH

HINT:

Use the same procedure as for the LH side.


Hide 53124E 24.INSTALL LOWER RADIATOR GRILLE MOULDING LH

B342275

a.

Engage the 2 claws and install the lower radiator grille moulding LH.


Hide 53123E 25.INSTALL LOWER RADIATOR GRILLE MOULDING RH

HINT:

Use the same procedure as for the LH side.


Hide 53124C 26.INSTALL UPPER RADIATOR GRILLE MOULDING LH

B342274

a.

Engage the 2 claws and install the upper radiator grille moulding LH.


Hide 53121F 27.INSTALL UPPER RADIATOR GRILLE MOULDING RH

HINT:

Use the same procedure as for the LH side.


Hide 28.INSTALL RADIATOR GRILLE EMBLEM

a.
B342272

Engage the 4 claws and 2 guides, and install the radiator grille emblem.


Hide 29.INSTALL GROMMET

a.
B343895

Install the 4 grommets.


Hide 30.INSTALL CLIP (w/ Front Spoiler)

a.
B340128

Install the 2 clips.

HINT:

Use the same procedure for the RH side and LH side.



Hide 53879A 31.INSTALL FRONT FENDER LINER RETAINER

a.
B342270

Install the front fender liner retainer.

HINT:

Use the same procedure for the RH side and LH side.



Hide 52521A 32.INSTALL FRONT BUMPER RETAINER CLIP

a.
B343902

Install the front bumper retainer clip.

HINT:

Use the same procedure for the RH side and LH side.



Hide 76852A 33.INSTALL FRONT SPOILER COVER LH (w/ Front Spoiler)

Hide 76851A 34.INSTALL FRONT SPOILER COVER RH (w/ Front Spoiler)

HINT:

Use the same procedure as for the LH side.