Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Sedan) › 2013.08–2016.04
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0092435 REAR BUMPER(for Sedan) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Sedan)  REASSEMBLY  


PROCEDURE

Hide 52023 1.INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B342298

Engage the 2 guides and install the rear bumper reinforcement sub-assembly with the 2 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 52156A 2.INSTALL REAR BUMPER SIDE SUPPORT LH

a.
B348876

Engage the 2 claws and install the rear bumper side support LH.


b.

Install the screw.


Hide 52155A 3.INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 52576 4.INSTALL REAR BUMPER SIDE RETAINER LH

a.
B348875

Engage the 4 claws and install the rear bumper side retainer LH.


b.

Install the screw grommet.


c.

Install the 2 screws.


Hide 52575 5.INSTALL REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 76894 6.INSTALL REAR SPOILER COVER LH (w/ Rear Spoiler)

Hide 76893A 7.INSTALL REAR SPOILER COVER RH (w/ Rear Spoiler)

HINT:

Use the same procedure as for the LH side.


Hide 81920 8.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.
B340131

Install the reflex reflector assembly LH with the bolt and 2 screws.


Hide 81910 9.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.