Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR BELT MOULDING
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0092438 REAR DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR BELT MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 68230C 1.INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

a.
B342314

Engage the 6 claws to install a new rear door glass outer weatherstrip assembly.


b.

Remove the protective tape.