Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR BELT MOULDING
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0092438 REAR DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR BELT MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 68230C 1.REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

a.
B342312
0,0 0.26,0 false
V100155

Protective Tape


Apply protective tape to the door panel in the area around the rear door glass outer weatherstrip assembly.


b.
B342313

Using a moulding remover, disengage the 6 claws and remove the rear door glass outer weatherstrip assembly.