Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
68210C
1.REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
75756C
2.REMOVE FRONT DOOR WINDOW FRAME REAR MOULDING
Using an infrared light, heat the front door window frame rear moulding.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not burn yourself with the heated vehicle body or infrared light.
Do not heat the vehicle body excessively.
Remove any tape remaining on the vehicle body.
| *a | Double-sided Tape |
Disengage the 2 clips and pull out the front door window frame rear moulding while peeling off the double-sided tape.