76878A
1.INSTALL FRONT SPOILER SIDE PROTECTOR LH
Using a piece of cloth, rub off any double-side tape that remains on the front spoiler cover LH.
Installing the front spoiler side protector LH while any double-sided tape remains on the front spoiler cover LH may cause adhesion failure. Therefore, completely remove the double-sided tape.
Using a non-residue solvent, clean the attachment surface.
On the front spoiler cover LH, coat the attachment surface for the front spoiler side protector LH with primer.
Do not apply the primer too thickly.
| *1 | Front Spoiler Side Protector LH |
| *2 | Front Spoiler Cover LH |
| *a | Marking |
| *b | Double-sided Tape |
Peel off the backing paper of a new front spoiler side protector LH, and install it using sufficient pressure.
Install the front spoiler side protector LH after the primer has dried (approximately 3 minutes).
76877D
2.INSTALL FRONT SPOILER SIDE PROTECTOR RH
Use the same procedure as for the LH side.
76852A
3.INSTALL FRONT SPOILER COVER LH
Install the front spoiler cover LH with the 5 retainers.
Install the 2 screws.
76851A
4.INSTALL FRONT SPOILER COVER RH
Use the same procedure as for the LH side.
5.INSTALL FRONT BUMPER ASSEMBLY